Refrigerator Repair Service In OKC – My Refrigerator Has Quit Running?

Technician Checking Refrigerator With Screwdriver

 

If your fridge or freezer suddenly stops cooling and stops freezing, you have several solutions. If your freezer is working but not cold enough to freeze properly, check the unit temperature to see if it is not cold enough.

Depending on what causes your fridge to fail to keep your perishable food cold enough, following this procedure can be helpful. If you follow these instructions and still wonder why the refrigerator is not cold, there may be a problem with the evaporator fan motor, which is exactly what your freezer is and why it is cold. If the engine fails, the fan cannot move the cold air, and the refrigerator runs noisy and warm. You will find that your fridge is not cooled, but its freezer was cold and you are in the freezer. If you followed the instructions above, but still wonder if there is a problem with your cooling system, this is probably not the problem.

If the condenser fan is not working, your refrigerator needs to suck in air and run for a while to compensate for the fact that the fan is no longer working.

If the compressor, evaporator or fan do not work as they should, the temperature of your refrigerator will continue to rise. If your fridge is working, check that it has not cooled down because its temperature is too high. Read this article to learn more about what to do if your fridge is not cool enough and what you can do to cool it down if the fridge is not cold enough. Your fridge should be at least 1 – 2 degrees Celsius cooler than normal.

To check if you have a dirty condenser coil, remove the small panel at the bottom of the fridge, clean out the lint and dust, pull out the power cord, get out of the under side of your fridge and go back to the fridge. When repairing a refrigerator, the hermetic sealing system of your refrigerator and the thermostat are checked.

If the compressor is mounted on top, make sure there is nothing on top of the fridge that blocks the air flow from the compressor. If you have a back-up condenser in your fridge, make sure that nothing falls into the fridge to block the airflow. Make sure that nothing blocks the passage between the freezer and the fridge compartment, and if the fridge barely stops running, if you do not hear it running or feel it vibrating, it does not work properly and needs further investigation. You hear or hear a fridge running But there is nothing that can block the air flow, such as a power cord or the thermostat.

Check the thermostat: If it is not at the right temperature, lowering the temperature of the refrigerator chamber is a good test, as many refrigerators are cooled by the vent openings in the freezer compartment. If the fridge is not going to do its job, you need to check it, and if not, lower it to a lower temperature.

If after checking many items on your refrigerator you can find no obvious reason for not running or cooling call a professional for refrigerator repair in OKC be sure and contact Appliance Repair OKC Services at 405-378-4566 or you can visit our website at https://www.okcappliance.com. You can also locate us on Google at https://cli.re/EKdbvd.

 

The post Refrigerator Repair Service In OKC – My Refrigerator Has Quit Running? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.