Washing Machine Repair OKC – My Washer Will Not Start?

Repairman Repairing Washer In Front Of Young Woman In Kitchen At Home

 

In the repair department, we saw how frustrating it can be when a customer’s washing machine simply doesn’t start up. We have repair services that find out what is wrong and fix a washer that doesn’t start, and that is what we are talking about today. Although there are a number of different options on the market for repairing a washing machine that has not started, there is no stop-shop solution to the most common problems and how to fix them.

If your washing machine is not running, do not skip the basic troubleshooting steps, but first check the clogging and kinking in the washing machine drain and drain hose for clogging or kinking. If your machine is not washing, first make sure that your machine is connected to a working outlet and then proceed to troubleshoot the machine itself.

The lid switch on a top load washer is a security device made to protect against the motor circuit from running when the lid is open. The lid button is usually situated below the primary top with an estimate on the lid or a pin connected to the lid that will certainly actuate the button when the cover is closed.
Disconnect your appliance from the power resource prior to starting, and after that remove the top panel or cabinet to access the switch.

When you have actually located the switch, validate that the switch is being activated mechanically and that any actuators or levers are not damaged or sticking., after that the switch may be defective.

If the switch is being activated yet there is no power being supplied to the motor or water valve circuits, remove the switch from the washing machine to check it for continuity.

With your multi-meter on the Rx1 setting, touch the probes to the terminals, then press and hold the switch button down. You need to get a reading of absolutely 0 ohms.

You will certainly need a substitute lid switch if you do not get this analysis.

A security attribute located on front load washers is the door switch and the door lock and strike. On the majority of models, the door switch needs to be shut, and also the door lock need to be turned on before the washer will start.

Exactly how to test the door switch and also strike on a washing device with a multi-meter:

The switch is generally situated in the door frame of the washer however might be part of the door assembly. Begin by carefully examining the switch to make sure that it engages the door lock assembly as well as that the door continues to be closed. You must additionally be trying to find any type of indicators of damages or cracking.

To examine the switch for connection, unplug the washer as well as get rid of the front panel in order to access the button. As soon as you have accessibility to it, remove the switch in order to evaluate it.
Utilizing a multi-meter set to the Rx1 setup, position the probes on the switch’s terminals, you should receive a reading of infinity. With the probes still on the terminals, press in on as well as hold the button’s switch, your reading should alter to no or about zero.

You will need a substitute door switch if your test results vary from those results. If you cannot determine the cause of you washer not starting and need washing machine repair in OKC call 405-378-4566 for Appliance Repair OKC Services. You can also visit our website at https://www.okcappliance.com or find us on Google at https://cli.re/EKdbvd.

 

The post Washing Machine Repair OKC – My Washer Will Not Start? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.