Wednesday, July 7, 2021

Freezer Repairs In Oklahoma City – My Freezer Has Stopped Freezing?

freezer repair Oklahoma City OK

Young Male Repairman Fixing Freezer In Kitchen

 

The condenser coil converts the refrigerant (freon vapour) into a liquid and emits heat. This is the same heat you feel when blowing on the freezer during the refrigeration cycle. The refrigerant is switched off and the warm steam is returned to the compressor to repeat the cycle.

An interruption of this cycle can stop the freezer cooling, and there are many factors that can contribute to this problem. Firstly, the environment is too cold and the freezer does not have enough runtime to maintain its temperature.

If your freezer stops working or freezes, the problem may be with the temperature control or thermostat. Thermostats are rotary controllers, capillary tubes or sensors that monitor the temperature of the interior lining of a freezer.

The thermostat has an electrical contact that sends electricity to the compressor circuit when the freezer needs to start cooling. If the contact between the sensor lamp and the damaged compressor circuit is not prompted to start. If you hear the compressor engine running but your freezer does not cool, the problem may be with the evaporator or condenser coils.

If the condenser coils are in your freezer model, this means that they are exposed to dirt. Over time, dust and dirt can accumulate on the condensing coil, blocking the right air flow and reducing the cooling capacity of your freezer. Cleaning the coils every few months helps ensure that your device is working properly.

Cleaning the condenser coils of your freezer is a simple task, where a vacuum hose is passed over the coils to remove dirt that could clog them.

The reason your freezer is running but not freezing is a defective evaporator fan. The Evaporator fan motor draws air into the evaporator coils and releases it out of the freezer. If it does not work, the freezer does not cool down. You can check if the fan motor with your freezer is the problem by opening the door and pressing the door switch.

This works because your freezer moves air through the condenser coil to drain it back into the device. If the evaporator fan or the evaporator motor fails, your freezer does not cool down. An automatic defrosting unit does not detect whether an evaporator coil is frozen, but if you see frost forming on the walls of the freezer, there is a risk that the coil will suffocate in frost, restrict the airflow and cool the freezer.

If your freezer does not overflow and you have a manual defrosting model, note the amount of frost on the interior walls, as the accumulation can affect its efficiency. If you see frost on a manual defrost unit, you will notice that your freezer room is shrinking. An automatic defrost unit can help you diagnose the cause and get things working again, but you may need one or two new parts to find a permanent solution.

If you have a failing freezer and need freezer repair in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com. You can also visit our Google business page at https://cli.re/Dyq1ME. Get your freezer working again by calling for service today!

 

The post Freezer Repairs In Oklahoma City – My Freezer Has Stopped Freezing? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

No comments:

Post a Comment