My Freezer Was Working But Now It Won’t Turn On?

repair tech repairing freezer with customer

 

 

My Freezer Was Working But Now It Won’t turn On?

This article discusses the possible causes of a freezer not freezing, including an issue with the start capacitor, a defective thermostat, or a faulty defrost timer. If the compressor is running constantly or will not even start, then the cold control may be defective. If you can hear the compressor running but your fridge is not cooling, the problem is most likely either frost-clogged evaporator coils or a stuck or broken evaporator fan.

If the defroster is faulty, then the evaporator coils will frost over, and your refrigerator will work harder to keep cool. \- This will cause your freezer to stop. The first thing to check when your freezer stops is the defrost timer. If it is faulty, then you will need to replace it. If the defrost timer isn’t the problem, then you should check the compressor start relay, start capacitor and start relay.

If these parts are in working order, then the problem is likely with your thermostat. To prevent the compressor from running too often, you should set the thermostat a few degrees lower than what you actually want to keep your freezer cold. If this doesn’t help, then the defrost timer may be stuck in the open position and not allow the thermostat to turn on the compressor.

This could also be caused by a faulty temperature control thermostat. The compressor start windings and the compressor circuit are an important component in helping the compressor to start. The controller needs to send power to the start relay which in turn helps the compressor start. If the electrical contacts on your freezer’s start relay are worn or corroded, it will not be able to deliver enough power to help your freezer start.

If your refrigerator compressor circuit begins to overload, the overload relay will shut off the current to the compressor, and your fridges will not send cold air into the fresh food section. The overload device receives power from the start winding and sends it back to the temperature control. The required speed of running fans is also monitored by this protection device. If there is not enough air or an ideal level of air circulating in your fridge, it will not be able to start up properly.

The broken evaporator fan is usually the cause of this problem. This fan is responsible for cooling your fridge and if it is not running, the compressor will not be able to work your refrigerator either. Clogged evaporator coils can also cause this issue. Frost on the evaporator coils can prevent the cold control from working properly, making it harder for your fridge to start up.

If your freezer was working before, but now won’t turn on, it could indicate an issue with the defrost cycle. The condenser coils located in the freezer section should be checked to make sure they are free from dust and debris. It is also important to look inside the refrigerator and make sure that frost isn’t building up on the back wall of the freezer section. If there is frost present, this indicates that there may be an issue with the defrost cycle or located evaporator coil.

The evaporator absorbs heat from the contents inside the freezer, cooling them down. This cooled refrigerant then flows to a condenser coil, where it transforms into a warm vapor. From here, the warm vapor moves to the compressor, where it is then transformed back into a cold refrigerant, releasing heat in the process. The cold refrigerant then travels back to the evaporator and starts this cooling cycle all over again.

When the evaporator fan stops working, it can cause your freezer to stop cooling. The typical freezer works by having a compressor that produces cold air which then circulates around the freezer and cools the items inside. If the evaporator fan stops working, then the cold air won’t circulate and the items won’t freeze. A repair of the evaporator fan is needed in order to get your freezer working like a typical freezer again. The compressor produces refrigerant gas that is condensed, then circulated by an evaporator fan which blows cold air into your freezer and helps to freeze your food.

If your Frigidaire freezer was working but now won’t turn on, it could be due to a stopped temperature control thermostat or an evaporator fan motor that needs to be replaced. It is recommended to set the appliance controls to keep the inside of your fridge around 40 degrees Fahrenheit. The compressor will then send out how much voltage it needs for keeping your refrigerator and freezer at the desired temperature. If you have checked all of these components and nothing appears wrong, you should check the control board as this may have malfunctioned.

We recommend seeking out experts in appliance repair who specialize in making and model of your fridge or freezer like Appliance Repair OKC Services.

If you have a freezer that was working but now won’t turn on, it could be caused by a faulty thermostat or perhaps a cool freezer with excessive frost buildup. If the refrigerant system is having trouble cooling, it can lead to excess frost buildup in the freezer, which is why it’s important to read the temperature regularly and keep it in check. The most common way of correcting this issue is to clear away any excessive frost that may have built up and run some defrost cycles.

To do this, you will need to unplug the freezer and manually defrost your freezer. This can be done with a hair dryer or by leaving the freezer door open for a few hours. If this fails to fix your freezer, it is likely that your stall defrost timer has failed. This timer helps maintain the internal temperature of the freezer, and if it has failed it could mean that the internal contacts have gone bad. The only way to solve this problem is to replace the stall defrost timer with a new one. If there is not sufficient run time for the compressor to be prompted into starting, then there may be an issue with either its source or environment.

To diagnose the issue, it is important to check if the freezer is getting power by examining the faulty electronic display board and compressor and fan motors. If all of these elements are working correctly, then you need to test the cold control switch, control overload relay and dust-frost in order to identify what is preventing your freezer from running. It may be that there has become a build up of dust on the condenser coils which is blocking air flow, leading to an increase in temperature. The most common causes of this issue are a malfunctioning electronic display board or motor problems with your refrigerator unit.

To schedule freezer repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Freezer Was Working But Now It Won’t Turn On? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.