What Causes A Freezer To Stop Freezing?
When the thermostat in your LG fridge-freezer is working properly, it tells the fridge-freezers control panel when it is time to begin or end the cooling process. The purpose of a temperature-controlled thermostat is to monitor your freezers temperature, then tell the control board how much electrical power to send to the fan and the evaporator compressor, so that your freezer can chill.
If the evaporator fan motor fails, then your freezer cannot freeze your food because the circulating air will not get cold enough. To test The evaporator fan motor, your freezer maintenance specialist will open your units doors and manipulate the door switches. The evaporator fan motor draws air across the evaporator coils and circulates it through the freezer, if this does not work, then the freezer is not cooling. Another reason your freezer is running, but is not freezing is because of the defective evaporator fan.
Another common reason why you might think the freezer is running but not freezing is that the contents are improperly packed. As a result, your LG freezer is unable to cool down and does not freeze any items that you have placed in it. When your LG freezer is cool, but not cool enough to freeze items, it is probably because your condenser coils are dirty.
If your model of freezer has the condenser coils located on the back of the unit, then this means that they are exposed to dirt. If your refrigerators condenser coils are dirty, then it is not going to work properly. If the coils of the evaporator are frozen, they cannot allow necessary air to flow through and that may cause the freezer not to freeze properly.
If the rear part of your freezer, where your evaporator coils are located, is very heavily frozen, then you may run into trouble with the defrost. Frost that is only building on the back of the freezer, where the evaporator coil is located, indicates an issue in the defrost cycle. If you notice your freezers evaporator coil is covered with frost, that means that the auto defrost cycle is not working the way it is supposed to. In most cases, fixing the problem that caused the buildup of frost, and letting your freezer run a couple defrost cycles, will remove excess frost, and your appliance will return to normal.
As a result, the appliance will not be running its cooling system, and the freezer stays hot. The sealed system might leak, and not enough Freon is available to cool the appliance to its desired temperature. Using a freezer to chill hot items, or opening a freezer often, can impact internal temperatures. If you fill your freezer to the brim, some items might not get enough cold air and stay unfrozen.
This means that the freezer is not producing enough cold air to freeze freezer contents, but is producing enough cold air to chill the contents of the cooler part. This can end up causing problems with your freezer because you do not have anything circulating the cold air inside your freezer. In doing this, the fan helps the freezer to cool by spreading the cold air out evenly across compartments.
As your refrigerators refrigerant soaks up heat and circulates throughout the cooling system of the freezer, it passes through the condenser coils. The job of that freezer is to move the air through condenser coils and distribute that heat across your entire appliance. Typically, most freezers will also include a condenser fan to push air over the condenser coils, helping make the heat-transfer process more efficient.
If you are hearing your compressors motor running, but your freezer is not cooling at all, there may be an issue with your evaporator or condenser coils. That is why, even though the compressor motor is running, your freezer is unable to maintain the freezing-cold temperatures necessary for food preservation. If you notice your Samsung freezers temperatures constantly rising, then it is likely the compressor and condenser coils are to blame.
If your Samsung freezer is not providing enough cool air anymore, checking your temperature settings is the first thing you should do. If your surroundings are too cold, your freezer might not be getting enough running time to keep the temperature. In effect, heat will get trapped inside the device, leading to insufficient cooling. For instance, if a door is not closed correctly, humid air may get trapped inside the freezer, freezing the coils.
Frost eventually causes your freezer not to cool down sufficiently, wasting your food. Another culprit that is frequently blamed for freezers not freezing is accumulating frost on (for those fridges that do not have automatic defrosters) coils. One of the most common causes for freezers to stop working correctly is for condenser coils on the back of the freezer to get coated with dust or ice. A common cause for problems in Samsung freezers is the buildup of ice on the condenser coils The condenser coils.
Checking might seem basic, but a freezer packed to the gills can result in clogged airflow, especially if ice cream tubs or bags of vegetables are covering the evaporator fan.
To prevent an evaporation, make sure that the bag of food storage you are using is designed specifically for a freezer. Stoppages are typically caused when any one component of the freezer breaks, requiring repairs or replacement.
Now, the circulation is not going to occur if you just overloaded the freezer with food (so do not rush to the conclusion that your freezer has failed if it stops freezing). It usually happens over time, and eventually will begin to obstruct the fan — remember, the fan helps to circulate the cold air within the freezer, so an obstructing fan can cause freezing difficulties.
For freezer repairs in Oklahoma City contact Appliance Repair OKC Services by calling them at 405-378-4566 or you can visit our website at https://www.okcappliance.com or also our Google business page at https://cutt.ly/YEnc8qk. Call today!
The post What Causes A Freezer To Stop freezing? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.
No comments:
Post a Comment