My Refrigerator Isn’t Cooling As It Should?
Even if the electrical components within the fridge are working correctly, the air that is cooling may leak out through improperly sealed doors. If the fans inside your refrigerator are dirty or not working, it can produce loud hums or whistling sounds. When Dirty or Faulty Condenser Coils become dirty or frozen, your fridge cannot get to the correct temperature.
Every once in a while, you might have to open the bottom or rear panels of your fridge and clean out your condenser coils, making sure that your condenser is able to generate the most chill. Cleaning your condenser coils will help the fridge cooler run more efficiently. Coil cleaning should be done several times per year to help your fridge operate smoothly. In most cases, it is essential that you clean the refrigerators coils at least a couple times a year in order to ensure that the refrigerator is running effectively.
Your fridge contains condenser coils, which are there to help your refrigerator stay cold. There are coils located underneath or behind the fridge, which cool down and condense your refrigerators refrigerant. For a fridge to cool correctly, the cold air must be circulating between vents and cooling coils.
To ensure that your whole fridge stays at its optimal cool temperature, airflow needs to be present in the compartments of the fridge. If your cooler compartment is cooler than 50 degrees F, then the compressor is probably working, but it is not cooling it quite well. If the compressor is working, but is not cooling, you can fix this problem by checking the refrigerators temperature.
If the coil, blower, or condenser fan are not the culprit for the compressors failure to cool, you will need to test the starter relay, condenser coil, or thermosistors to further diagnose the issue. If your coolers temperatures are correctly set, a frosty coil is most likely to be causing the issue. If the evaporator fan is not working, then your freezer is going to be cold, but your fridge might be warmer. If the condenser fan is not working, the fridge and freezer both will not be cooling.
The condenser fan motor is responsible for cooling the air, and if both the fridge and freezer are not cooling correctly, this is a probable culprit. If the fan motor is not working, you might get a cooler freezer, but no cooling at all in the freezer. The condenser fan motor blows air across the dirty or malfunctioning condenser coils to keep them cold, so if this breaks, then your fridge is not cooling well. The job of a condenser fan is to keep your compressor and condenser coils cool, so if your compressor breaks, the fridge starts heating up.
If the condenser fan does not work correctly, your refrigerators temperature could go up, and your compressor could get too hot. If the condenser is dirty, this may result in a temperature increase of five to 10 degrees in your cooler.
If the refrigerator believes that the door is always open, then it is not running the condenser hard enough to keep a proper cold temperature. When that door is malfunctioning, it may prevent the cold air from flowing to your refrigerator as much as it needs to in order to maintain proper temperatures. Gasket Around Refrigerator Door The fridge door helps to keep the cold air within the appliance. The evaporator fan is the part of the refrigerator that blows out the cold air that you feel when you open the doors.
It pushes air over the evaporator coils, cooling them, then pushing air across the freezer and into the fridge. The evaporator fans job is to draw the cooled air out from the other set of coils, so that it is circulated through the whole unit – first through the freezer, and then the fridge (or fresh foods section). The refrigerant runs through the other set of coils and turns to gas, making it cooler.
If the condenser coils are dirty, they cannot efficiently conduct heat, forcing the fridge to work harder to keep the temperature. Clogged condenser coils may result in a poor circulation of air, restricting the refrigerators ability to maintain cooling. When your refrigerators coils are unable to defrost on their own, fans are not able to draw the air needed to keep the refrigerator cold.
If a control board is malfunctioning, it may be reading temperatures incorrectly, and will prevent the fan and other parts from turning on when needed to keep the unit cold. If temperature controls accidentally go too high, the fridge may seem like it is not working. Another simple solution is to test your refrigerators and freezers temperature settings. The thermostat may have been bumped by accident, and this will cause the temperature within the refrigerator to fluctuate.
It seems an obvious one, but sometimes a thermostat setting that is set too low will result in an increase in the temperature of your fridge. When a thermostat that controls your temperature becomes defective, it does not properly measure the temperature, and your fridge does not get the correct temperature. If your fridge is not cooling correctly, but your freezer seems fine, then the problem may be the evaporator fan. If you plug your refrigerator back into power and it is problem is solved, it is very likely that your evaporator coil is frozen due to a faulty defrost timer, defrost thermostat, or defrost heater.
If the evaporator fan cannot move freely, you will have to allow it to defrost, and then test whether it is working; if not, you will have to replace it. If the condenser fan is faulty, you are likely to notice unusual, clanking noises coming from the rear of your cooler.
To schedule refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!
The post My Refrigerator Isn’t Cooling As It Should? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.
No comments:
Post a Comment