My Refrigerator’s Temperature Isn’t Cold Enough?

Appliance Repair Technician Checking Refrigerator With Flashlight At Home

 

A good rule of thumb is to keep a lot of food in the refrigerator to keep it cool, but don’t pack it so tightly that air can’t easily circulate from shelf to shelf. Frost build-up in the freezer can also block the air vent, reducing or preventing cold air from entering the refrigerator. If the refrigerator door is left open by mistake, cold air may escape and hot air may enter, which lowers the internal temperature of the refrigerator. Torn or loose door gaskets may cause cold air to leak, leaving the refrigerator warm.

Even if the rest of the refrigerator is functioning properly, if the magnetic seals on the doors, also called “door seals,” are faulty, fresh air from inside the refrigerator may escape. If these seals are cracked, loose, or broken, cold air may escape from the refrigerator. These vents should never be blocked with ice, but if, for any reason, this happens, air circulation will be impeded and the refrigerator compartment will not cool down.

If that air vent is blocked on both sides, your refrigerator won’t cool enough and your freezer could freeze overtime. However, if the vent is covered with ice or food stored on both sides, this can seriously affect the refrigerator’s ability to circulate cold air and keep it cool on the side of the refrigerator. Most refrigerators create all the cold for the freezer compartment, so the refrigerator compartment is maintained with a vent between the refrigeration and freezer zones.

However, in order to maintain the optimum temperature for the entire refrigerator, air supply is required in the refrigerator compartment. An overcrowded refrigerator can also restrict the flow of air between items, causing the temperature to rise. If fresh air does not reach some parts of the refrigerator, remove some objects from the refrigerator and make sure that the air flow is not restricted, especially near the vents.

If the refrigerator is not cold enough, there may be a problem with the condenser fan motor. If the condenser fan motor is not working properly, the refrigerator will not be able to cool down normally. If the condenser fan does not work properly, the temperature of the refrigerator may rise, and the compressor may overheat. The condenser fan motor is responsible for circulating cold air. If neither the refrigerator nor the freezer cools properly, this is likely to be the culprit.

If you hear that the compressor is running but the refrigerator is not cooling, the problem is most likely a clogged evaporator coil or a clogged or damaged evaporator fan. If the noise becomes louder when you open the freezer door, you will know that it is an evaporator fan.

Unplug the refrigerator and remove the cover from the evaporator fan located at the back of the back of the freezer compartment. Make sure the doors and drawers of the refrigerator close properly. If the open door was preventing your refrigerator from cooling down, this process should fix your problem.

If the problem persists, the refrigerator may be faulty. While there are some issues you can try to fix on your own, if your refrigerator still doesn’t have enough fresh food, we recommend that you get it repaired right away. Here are some tips for troubleshooting your refrigerator to help you focus on the problem if you notice your refrigerator is not cooling down. If you open the refrigerator and find sour milk or hot wine, it should be obvious that your refrigerator is not cooling well enough.

Your refrigerator can also lose its cooling capacity because it literally loses the coolant that generates cold. Your refrigerator can cool effectively, but it loses cold due to an open door.

Refrigerator door gaskets (the rubber strip that covers the refrigerator) can get dirty, age and dry out. A refrigerator door that does not close loses cold slowly and therefore is not cold enough, although it may look fresh when opened. Clean the refrigerator door with a mild detergent or touch the vinegar. If the seal is dirty or damaged, cold air may escape and raise the temperature of the refrigerator even if the door is closed. Although cleaning the refrigerator door seal with a damp cloth can restore cool temperatures, a damaged door seal will need to be replaced.

If the air damper does not close or open, it can affect the temperature of the refrigerator while the freezer is maintaining the correct temperature. The air flap controls how much cold air is transferred from the freezer compartment to the refrigerator. When a damper door fails, it can prevent fresh air from entering the refrigerator, as it is needed to maintain the correct temperature.

If the coil is dirty, the refrigerator will have to work harder to remove heat. If the coil is dirty, the refrigerator will not be able to maintain the correct temperature. If the battery gets dirty, the refrigerant cannot be cooled sufficiently, and the internal temperature may increase.

However, if these coils become covered with dust or dirt, they will not be able to properly cool the refrigerant and the temperature of the refrigerator may rise. If you find a lot of dust accumulated on the coils, plan to clean them once or twice a year to keep your refrigerator cool. By removing dust, you can significantly improve the cooling performance of your refrigerator.

The refrigerator may get a little warm when you open the door, but it is designed to gently maintain a cool temperature to cool food. If the fan motor isn’t working, you may have a cold freezer, but not a refrigerator in your refrigerator. Typically, the refrigerator condenser fan and compressor, located near the floor at the back of most refrigerators, will turn on when the thermostat requires more cooling.

If the temperature control thermostat does not work properly, it may interfere with the operation of the refrigerant system. However, milk cartons or other objects can hit the thermostat controls inside the refrigerator and change the set temperature. If the control board fails, it may incorrectly detect the temperature and prevent the fan and other parts from turning on when necessary to cool the refrigerator.

If the temperature control board is defective, it will stop supplying voltage to the cooling system. The control board adjusts the power of the compressor and evaporator fan based on the thermistor readings. The thermistor monitors the temperature of the refrigerator and sends the temperature reading to the control board. This sensor helps tell the refrigerator controller or circuit board what the temperature is, which should cool the refrigerator further if necessary.

Since the refrigerator is on, the next step is to check the temperature knob. Regardless of what the dial says, your refrigerator temperature should be around 38-41 degrees Fahrenheit. Write down the temperature and then turn the refrigerator knob. Try again after two to five hours and see if your refrigerator has reached its optimal temperature.

If you are having refrigerator repair issues and need refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services. They can be reached at 405-378-4566 or you can visit their website at https://www.okcappliance.com or our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Refrigerator’s Temperature Isn’t Cold Enough? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.