My Ice Maker Isn’t Making Ice But The Water Works?

Refrigerator is making fresh clean ice cubes.

 

 

My Ice Maker Isn’t Making Ice But The Water Works?

A common culprit for blockages is frozen water in your water lines; if that is the case, simply turn off your water supply valves and defrost your water lines to get things working again.

A clog, leak, or damage to a water line can make my ice maker shut down automatically or otherwise stop working. Not changing the water filter, or allowing it to become clogged, can result in the Ice Maker not working as intended. It causes a buildup of sludge, deposits, which could not only harm your ice maker, but also damage your entire fridge.

Anything that regulates the flow of water into the ice maker could prevent it from producing ice, particularly if it becomes clogged. If a water line becomes clogged, no water is coming out, and you are not making ice. If a whole load of ice gets stuck, there is no way to form any more ice, and your water line may also cause problems because it cannot refill your tub.

In some cases, an ice machine will produce cubes that are either too small (in the absence of the water line jam) or too large. In these cases, making just a slight adjustment in the amount of water used will return cubes to just the right size. In some cases, a fridge might even be designed to stop dispensing ice or water once a filter is past the “replacement by date,” which can make the fridges ice machine appear not to be working.

If you cannot get any ice or water out of your fridge, then your first suspect should be your filter. Eventually, anything that is been filtered from the tap water before becoming ice eventually gets trapped in the filter.

When the refrigerator is turned off, it will slowly heat up and melt any ice that is in your water supply. The first way to melt the ice is to disconnect your refrigerator from power and defrost your freezer and fridge.

To defrost, you will have to place all of the items that are in your freezer or refrigerator into an ice-filled cooler for now. If you get freezes, you will have to defrost the freezer, which is done by turning off the freezer and letting the ice melt. You can try to defrost the ice machine with just a little hot water, but that might not solve the root issue.

Warm water melts away any ice bits that are frozen, while adding no chemicals to the ice makers trays — making it safer for you to start making ice again right in the rig. Remove any remaining ice manually from the mold by adding a little water and leaving for one minute. Restore power to your cooler and listen for water supply to refill mold.

If your thermostat is set too low, your whole ice machine could suffer, freezing the water before it gets to the ice-making mold. The fill pipe that supplies water to your fridges ice maker can freeze, and result in water not getting to the ice maker.

Water to Ice Maker The ice maker gets water into your fridge from your homes main water supply, and a blockage in the valve which allows the water to enter your fridge could be the reason that is keeping your machine from making ice. The ice maker module feeds the electricity to the water input valve, and if that goes bad, then it needs to be replaced.

A broken valve also stops water flowing if the water is turned on too fast to the water shutoff valve. It is possible the valve in the water supply line leading to your water spigot is defective and is not opening completely, assuming that it is opening at all.

It can be confusing and frustrating when the same refrigerator is capable of making ice, but somehow cannot disseminate water. If you use the ice maker daily, or even weekly, it is easy to get addicted to convenient ice and a tasty, cold drink. There may be a few reasons why your ice maker may not produce enough ice, including a lack of water pressure or a crack in your water supply.

Some issues with ice makers could eventually cause bigger (and more costly) problems with your fridge or freezer, so it is important you get an immediate fix so you can get things working correctly.

If you tried these ice maker repair tips and the ice maker is still not working, plug the fridge back in and use Appliance Repair OKC Services for refrigerator repairs. While the savvy home owner may be able to perform these repairs and replacements on their own, those who are uncomfortable or unfamiliar with this process should consider calling in professional appliance repair services when their ice maker is not working. If none of the above steps fix the issue, then it is time to call in a professional fridge repair technician.

Replace makes sure that you are never dispensing ice that is contaminated or of low quality, and you are never drinking water from the refrigerator that is unsafe or tastes foul. You can simply bring your cup up to the door of the fridge and have your ice with a push of a button. Having ice ready to go anytime you want it or need it is a luxury that we all take for granted, that is, until you reach in to grab some from your freezer, and there is no ice.

A blockage in a line or closed valve can easily explain the sudden absence of ice, as long as there is no way for you to get fresh ice.

To schedule ice maker repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Ice Maker Isn’t Making Ice But The Water Works? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Freezer Stopped Coming On And Now Won’t Start At All?

Serviceman Repairing Freezer With Toolbox In Kitchen

 

 

My Freezer Stopped Coming On And Now Won’t Start At All?

If your freezer stops working, or is not freezing, it could have an issue with your thermostat, which controls the temperature. If your freezer has stopped working and is not freezing, there may be an issue with the starter capacitor. If your freezer is not freezing your food, that may mean that you have an issue with the compressors startup relay.

If you do not hear your compressor clicking, and the freezer is not cooling, there could be something wrong with your compressor or the compressor startup components. If you do hear the compressor motor running, but the freezer is not cooling at all, there may be an issue with the evaporator or condenser coils. If the compressor seems to be running, or is making some sort of buzzing or sound, but your refrigerator is not cooling at all, then it is time to call in the service professionals.

If you hear the compressor running, but your fridge is not cooling, it is more than likely that a frozen coil is the issue, or that a evaporator fan is jammed or broken. You will know it is the evaporator fan if the noise gets louder when you open the fridge door. To test for an evaporator fan motor, your freezer maintenance specialist will open the units doors and manipulate the door switches.

If the condenser fan motor has frozen, defrost your freezer before turning it back on. If a new starter relay unit has been installed, power your freezer back on and test to see if it is frozen now. To check for a problem start relay, your repairman will disconnect your freezer from the electrical grid and pull out the starter relay unit from your compressor.

If he powers up the freezer before it has time to settle, the compressor will not be working properly, or at all. The compressor produces, and then circulates, refrigerant through the freezer, so if your compressor becomes defective, your freezer does not get cold. The job of this freezer is to move air through condenser coils and distribute that throughout the entire unit.

The condenser coils convert the coolant from vapor into a liquid, releasing heat–the same heat that you feel when it is blowing around near your freezer during the cooling cycle. The evaporator takes heat away from the freezer, cooling the contents, and turning cool refrigerant back to hot vapor. A closed-loop refrigerant absorbs heat and moisture from an internal storage area, mostly the freezer, and passes through a series of coils, which pull off the heat and dissipate it to the air.

A bad door seal lets hot air into your refrigerator, leaking out cold air, enough that you cant keep the freezer from freezing. Every second that the door is left open increases the temperature of both the refrigerator and the freezer. If you adjust your refrigerators thermostat for a cooler temperature, the compressor in the fridge will activate, forcing lower pressure to flow through a cooling fan.

It comes with a sensor that tracks air temperature, adjusting it accordingly while supplying energy to the compressors motors and the fan circuit. The thermostat for controlling the temperature also has electrical contacts, which feed electricity into the compressor circuits when the freezer needs to start cooling. The purpose of a temperature control thermostat is to monitor your freezers temperature, then tell the control board how much power to send to the fan and the compressors evaporator so that the freezer can start freezing.

If broken, the thermostat would be unable to read temperatures accurately and would not be able to tell your appliance how cold inside your freezer is. A broken thermostat will not send electricity to the refrigeration system, and the freezer then does not get any cooling. If the compressor is continuously running, or even does not start, the cooling controls might be faulty.

A cold control stuck in the “open” position, or the defrost timer stuck in “defrost” position, also prevents your freezer from running. The inside contacts on the defrost timer may be bad, which causes the defrost timer to stop when it is defrost, meaning that the compressor is not being signaled to defrost air inside the freezer. Sometimes, a manual defrost will return your freezer to working condition.

Not every frost-free freezer will have a manual setting, and even if it does, you should still call in the repair professionals at Repair Aid to repair or replace your defrost timer for you. In most cases, fixing the problem causing your frost accumulation and letting your freezer run a couple defrost cycles will remove excess frost, and your appliance will return to normal.

If you have allowed your freezer to set up since you moved it, but it is still failing, then you are likely dealing with an electrical problem. A damaged or malfunctioning electronics control board can cause many problems, but one of the most common is that the compressor and fan motors are running constantly, effectively keeping the freezer from closing.

Another reason your freezer is running, but is not freezing is the fan in the evaporator being bad. If your condenser fan assembly, or the motor powering the fan, is faulty, then it is possible your Fridaire freezer is not freezing. Another reason why your Frigidaire freezer may not function normally is if your temperature-control thermostat has stopped working.

Well, moving the freezer, particularly when not vertical, may cause the compressor oil to leak in to the cooling tubing. If you take off the lid inside your freezer, only to discover that your coils are totally filled with ice, take everything out of your freezer and refrigerator, disconnect the power, and allow to thaw for 24-48 hours.

To schedule freezer repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Freezer Stopped Coming On And Now Won’t Start At All? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Refrigerator Is Running And Cycling Constantly?

an appliance repair technician in work clothing repairing a refrigerator

 

 

My Refrigerator Is Running And Cycling Constantly?

If you have a fridge with this exact same issue, we have a few tips to think about that may be helpful in solving this issue. If your fridge is running for what seems like an entire day, one of the more common causes is also the easiest one to solve. If you have eliminated this reason as an issue, there are some other reasons why your fridge may run continuously.

Most of the time, keeping the freezer too cold is going to make your fridge work harder and constantly run, which is not healthy for it. This would result in my refrigerator running, but it would not get internal cooling down to its preset temperature.

Your fridge is going to try and keep this temperature anyway, just running all the time. If you set your temperature too hot, your fridge will need to work even harder to keep your cooler cold. The refrigerator will then require more cooling, and the appliance will be running almost constantly.

If the circuit boards regulating the temperature are malfunctioning, the refrigerator will be running continuously and getting too cold. If the master control board is defective, the fridge may begin running continuously to try and make up for a defective piece. If your thermostat is not doing its thermostats job, the ice particles build up on the coils, and that causes your fridge to run continuously because it does not receive a signal that the fridge is at the correct temperature.

If the condenser coil is visibly dirty, the fridge will be running continuously trying to keep it cold. To clean condenser coils on a Refrigerator, you will want to disconnect the appliance, remove the grill protector, and brush off any dust or pet hair. If a dirty condenser coil is why your fridge is running constantly, fixing this problem is actually pretty simple.

Whether it is simply the condenser being dirty or if it is a broken motor, fixing your refrigerator not stopping is something that you can do at home. If your refrigerator is running continuously and does not stop, and you cannot seem to locate the source, then it is time to call in a fridge repair specialist from Appliance Repair OKC Services.

Your refrigerator uses up a ton of power, and that gets worse when it does not stop running. If your fridge is constantly running, it probably means that it is struggling to keep things cold. Heat is forcing your refrigerator to be on all the time just to keep things cold.

Your fridge is going to need to be running pretty much continuously in order to compensate for your fans no longer working. If you load your refrigerator full, like after just returning from shopping, for instance, you are indirectly forcing the appliance to heat up, meaning that it will need to run continuously until the food is chilled.

The issue is, running continuously means that something is wrong, it is sucking up power, and is bad for the refrigerator itself. Of course, my fridge is connected to power and gets energy (it is running all the time), so it is not really a feasible solution for most. Even new appliances do not constantly run, so if your refrigerator does, then look at the condenser coil.

This happens frequently around the condenser coils, and it could be stopping them from doing their jobs correctly, leading to your fridge running for longer than it should.

When your defrost heater stops working, the ice quickly builds up on the refrigerators coils leading to your fridge running continuously. If your defrost heater assembly is faulty, the fridge will not defrost, and the frost will keep building on your evaporator coils. Several times per day, the defrost heater is turned on for several minutes to melt away any ice that may have built up on your refrigerators or freezers evaporator coils.

If your defrost timer is not working correctly, it may result in excessive buildup of frost, forcing the appliance to operate longer periods of time in order to keep temperatures in an appropriate range. If a defrost stop is faulty and no longer opens (due to ice accumulation, for instance), your appliance can continue running longer than normal. There could even be a leak, forcing your appliance to continue running continuously.

The most common reason why your Whirlpool fridge keeps running is because the thermostat is not installed properly. Your Whirlpool fridge also might have contaminated or clogged condenser coils if it is running often, so be sure to regularly clean the appliance.

Unplug the Refrigerator Carefully pull your fridge from the wall. Remove the cover on your condenser coil. Empty all items out of the freezer Unplug the fridge Follow the manufacturers instructions to get to your condenser coil.

To keep food cool, your refrigerator will work to keep the temperature stable by producing cold air. Your refrigerator responds by cooling longer durations simply to fight off outside temperatures.
If your fridge stays hot, it will keep running its compressor until the correct temperature is reached. The compressor will need to run more, causing the fridge to also cycle continuously. If your fridge is doing this, it is likely keeping your food cool anyway, but will be detrimental to your electric bill if you let it go unchecked.

To schedule refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Refrigerator Is Running And Cycling Constantly? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

Cooktop Creates Sparks When Turned On?

Young Woman Looking At Male Repairman Examining Oven In Kitchen

 

 

Cooktop Creates Sparks When Turned On?

If a burner element in an electric cooktop surface coil is igniting, you know. On gas stoves, you would expect to see a little sparking when you turn on, but with an electric stove, a spark is just bad news for you whenever you see one.

When your gas stove keeps clicking, it is because a sparking electrode keeps trying to spark the gas, even though there is no need. If each burner keeps clicking, the problem is likely any of the above, not the spark electrode. While it is very common to have more than one burner begin clicking while you are lighting the stove, that does not necessarily mean that you have to change out each and every spark electrode in the stove.

Turning the electricity off to the gas stove, either by pulling the plug or turning the switch in your electric box (breaker), should stop the clicking, since the spark electrodes cannot spark without electrical current. If fluid has entered the switch, you should disconnect power to the gas stove and allow the switch to dry.

If the switch continues to spark, you can test the switch with a multimeter to see if the switch is damaged beyond repair and needs replacement. You can check each switch individually to see if one needs replacement. If you are not sure whether an ignition switch or spark module is causing the clicking noise, the ignition switches can be disconnected from the spark modules to identify the responsible part.

If the faulty spark ignition switch fails at electrical contact closure, it will transmit a constant voltage to the spark module, which causes consistent clicking. When you open the cooking pot handle to turn the burners on, the spark ignition switch is closed so that voltage can be sent to the spark module. The ignition in your stove is controlled by an ignition switch, which tells the burner it is time to ignite, and the spark module, which is the part that produces the actual spark.

A typical spark module will click as many as three times before sparking and lighting up your stove. If you feel the click coming from your stove, and you look closely, you might notice it is sparking consistently too. You also will want to turn off your sparking burners immediately when you notice that the sparking is happening in an electric stove.

Typically, Sparking is a rarer issue, but it does happen, and there are several causes you will want to fix before trying to use your stove again. Whether your burners are clicking and not turning on, or they will not stop clicking even after they are turned off, this issue could be caused by defective parts.

Like many problems with your burners, the accumulation of fats and food particles may be the reason why the burners begin clicking. Liquids from cleaning and cooking may be getting in your stove, and are causing your burner to make that clicking noise all the time. You can often detect causes before the popping happens by checking if the burners are wobbling as you take and put them back in for cleaning.

What happens when your burners begin to spark because of loose connections is the higher resistance causes the entire thing to heat up. When those connections get loose, your burners start to spark because of high resistance. Use may result in higher resistance, which may cause it to get too hot and begin burning wires, or it may result in an arc, which is what you are seeing with sparks.

In extreme cases, sparking elements may blow out a circuit board, making repairs harder and harder. Ticking is quite a common issue, especially in ranges with spark-ignition systems. If your burners are clean and dry, and your ignition switches are working properly, then the likely culprit is the sparking component being faulty, causing ticking.

If a switch is faulty, this can result in an ongoing power supply to the spark module, which would result in a continuous click from the spark module. The spark switch starts ignition by sending electrical current to the spark module. These switches are controlled with a knob which, when turned to light, closes the switch, which allows voltage to flow to the spark module, which routes it to an electrode which produces the spark. When we push on either gas knob, we apply pressure on the button that will close the electrical contacts, thus, sparks are generated and corresponding flames are lit.

It is common that when the knob is depressed and rotated, the sparks, or clicking, occur simultaneously for all surface burners with natural gas. When the knob is turned and the burner is engaged, it will produce an electrical spark in order to ignite the mixture of air and gas flowing out the burning head in order to produce flame. The spark electrode ignition device, also called a surface burner ignition device, is located near the burn head at the top of the cooktop. Grease, water from spilled pans, or even the extra damp sponge used when cleaning up your stovetop area could get your spark electrode igniter wet, causing it to continuously spark.

Like the spark electrode igniter, water can get to the spark igniter too, whether it is through cleaning the stovetop handle, or spilling from boiling pots over the top of the stove. The spark switches may get shorted by the presence of water, electrical surges, or a variety of other reasons.

If it appears there is no evidence of damage, and the element continues to spark even after being connected to another outlet in your cooker, then it is likely to be faulty and needs replacing. The spark module can be tested for continuity using a multimeter to determine whether or not it is faulty.

Not only does that constant click become really annoying really fast, but having the gas burner on the stove keep clicking is going to wear down the igniter a lot quicker as well.

If you are having oven issues and need oven repair in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com. Alternatively you can also visit our Google business website at https://cutt.ly/YEnc8qk.

 

The post Cooktop Creates Sparks When Turned On? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Oven Isn’t Getting Up To Correct Temperature?

technician repairing oven with customer

 

 

My Oven Isn’t Getting Up To Correct Temperature?

Give your oven time to warm up, and test to see if the oven is set to the right temperature, or needs adjustment. If the oven is not heating up yet, check your thermostat and the switch on top of the dial. If your oven is still not heating properly, you can check the gauges using an ohmmeter. You can also disconnect the appliance and test if the temperature sensor is producing the right amount of resistance.

Before buying a replacement thermostat, be sure to verify the temperature sensor is not touching the interior walls of your stove. Simply put a kitchen thermometer into the oven, and see if the temperature setting is the same as the temperature on the thermometer. An oven thermometer can help you identify whether the oven is regularly dropping below or above your set temperature. Set your oven to 300 degrees F., then test your oven thermometer after about 10 to 15 minutes, once your oven is completely heated.

When the temperature drops enough, your ovens thermometer senses this and signals your control board to fire up the heating elements again to raise the temperature. When the temperature gets low enough, the thermometer will signal the control board of the oven to heat up the baking element and raise the temperature. The thermostat controlling the temperature feels fluctuations in the ovens temperature, cycling on heat if too low. The thermostat handles those changes, signaling the oven to turn up or down its heat in order to keep its set temperature.

The next item you want to focus on when the oven is out of heat is your thermostat. If you have checked to make sure that the heating elements are working correctly, there is a chance your electronic controls controlling the temperature of the oven are not reading a temperature drop as a problem. In all honesty, the faulty thermostat or heating elements in your oven are the most likely culprits for why your oven is unable to keep a consistent temperature. A faulty heating element — otherwise known as the baking element or the baking coil — is the common cause of why your electric oven or range is not heating up properly.

If your oven does not heat quickly enough, it never seems to reach the correct temperature, or food is burned at the top while being undercooked at the bottom, your baking element could be to blame. One of the most common problems is if the oven is not warming up to the correct temperature. Sometimes, your gas stove may be heating up, but you may be seeing the wrong temperature on your display. If you notice food taking longer than it should to cook, or coming out of the oven undercooked, it is possible your furnace is not reaching the right temperature.

If you notice your electric oven is not heating to the right temperature, and your food comes out undercooked, this could be caused by the thermostat on the electric oven being faulty. The thermostat might work properly, but some ovens have malfunctioning temperature sensors or bulbs. An oven that is not warming up is often a result of either an incorrect burner (for gas-powered ovens) or an electrically heated element (for electric-powered ovens). Your gas oven might not heat if your cook light is not working, or is completely off.

When a bake element breaks, it might not function normally when you fire the oven — and this includes failing to get it up to the proper oven temperature. If you have installed a new element, but the oven is still malfunctioning, it is possible you may have a wiring problem.

If your food does not come out the way you expected, make sure that both the broiler and baking elements are really heating up when you open your oven. If your burners seem fine, you can switch back on, set the gas oven to warm, and watch for your burners early in the heat cycle. The igniter, or spark, will turn on to hold open the safety valve until the oven has reached its assigned temperature.

The igniter continues to open the gas valve during the entire cooking process, to let the gas flow and keep the oven at its assigned temperature. When a hold-off occurs, you will notice that your KitchenAid oven is inaccurate because the interior temperature gets too low before gas can restart. To fix KitchenAid ovens that do not heat up, ensure that your temperature readouts and the actual temperature are synchronized by recalibrating your thermostat. A malfunctioning thermostat can cause it not to increase temperature as intended; therefore, the dial indicates a lower temperature than the one you have set, but in reality, temperatures are lower in the oven.

If the oven is not getting hot enough, the problem could be the oven door itself is not closing completely, or is not sitting flush in its housing. If an oven door cannot close, heat is continually being lost, and the amount of heat output from the furnaces programming is not sufficient to cook food completely to the specified temperature. When your oven stops heating properly (or never does), that can be quite the disappointment. Another common problem is that the clock on the oven is flashing, but everything else in the oven is working just fine.

The oven is not heating quickly — there could be several reasons that you could be trying to fix. Now that you know all of the possible reasons why your oven is not heating up fast enough, you should be able to spot an oven not heating up fast and fix it yourself, too.

If your broiler and burners are working, but the oven is not heating, then you may have a malfunctioning burner, which is the most common cause of an oven malfunction. For the more serious problem that the gas oven is not heating at all, you might have a damaged burner or the stovetops igniter. You may also want to place an oven-safe thermometer inside as you are preheating, so that you can check that temperatures are consistent.

If you are having oven issues and need oven repair in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com. Alternatively you can also visit our Google business website at https://cutt.ly/YEnc8qk.

 

The post My Oven Isn’t Getting Up To Correct Temperature? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Refrigerator Has Stopped Cooling My Food Sufficiently?

Tecnician repairing refrigerator

 

 

My Refrigerator Has Stopped Cooling My Food Sufficiently?

The lights on the refrigerator are turning on, you hear a fan pumped the air inside, but the air is not cooling. Your fridge contains two fans, which are an important part of keeping your appliance running, and if they are not working, it could be a reason why your refrigerator is not cooling. If the fridge is too full, airflow cannot circulate enough to keep your refrigerator cool. Without proper circulation of the air, the fridge cannot keep the interior cold.

If your fridges compressor is not working correctly, your fridge is not cooling properly. If the freezer is still working correctly, but the refrigerator is not cooling, this is an indication it could be an issue with the fan motor in the evaporator. If the compressor, which circulates the refrigerant through the system, increases the pressure at warmer parts of the loop, and increases the temperature of the refrigerant, is not working, then your refrigerator is not cooling. The issue with a refrigerator that is not cooling at the proper temperature may be that the compressor is having trouble starting.

It may be that the cooler section is still cooling, and that a fan is working, in which case the temperature control should be checked. Every second that the doors are opened increases the temperature of both the refrigerator and freezer compartments.

A fan circulates cold air from the freezer into the other compartments within the fridge. The cold air from the freezer goes into the cooler and out of the cooler compartments via the ventilation in both the cooler and the freezer. Cold air cycles in and out of the vents.

Clogging up your cooler with too much food will clog the air vents, which carry cool air out of your cooler. Also, if air vents are blocked by too much food, cold air cannot reach the interior. If your fridge or freezer is packed too tightly, you can clog the vents and stop cool air from reaching the fresh produce compartment. Freezer ice accumulation may also block a vent, decreasing or blocking cold air from reaching a cooler compartment.

If anything blocks the cold air, this could cause uneven temperatures inside the refrigerated compartment. Cold air cannot effectively travel through the entire unit, and ultimately, products placed within will be damaged if a fridge is crowded with products. A freezer can function properly if the malfunctioning air dam is working properly, but cold air cannot enter the fridge quite as well. If your fridge or freezer is clogged with food, the problem of the fridge not cooling could be caused by obstructed air ducts.

That is why, if your fridge is not adequately insulated, it can make the refrigerator feel like it is not cooling at all. Condenser Coils, and problems with them, can mean that your fridge is not getting enough cold air. If condenser coils are too dirty, then the unit cannot get cold enough, and it cannot cool the interior of your fridge down to a suitable temperature. If your fridges condenser coils are seriously dirty, then it is not going to adjust correctly, which makes the fridge work harder to cool itself.

Just like how business-level ice machine maintenance keeps the ice producing correctly, cleaning your condenser coils of dirt every 3 months helps maintain the fridges temperature. If the refrigerators condenser coils become dirty, they are unable to cool the refrigerant enough, and internal temperatures may increase. Ice may build up on the condenser coils if some part of a fridges defrost mechanism fails, making it more difficult for a fridge to keep its cooling. There are coils located underneath or behind the refrigerator which cool down and condense refrigerant in the fridge.

There are coils for evaporators and circulating fans located in your refrigerators freezer area. Located under the fridge, or at the rear, the goal of the fan motor is to pull air across the condenser coils, cooling down the condenser coils. The evaporator fan is tasked with pulling cooler air over a different set of coils, which is then circulated through the whole unit — first in the freezer, and then in the cooler (or fresh produce section). Located behind the ventilation opening within the freezer, usually at the back of your refrigerator, evaporator fans circulate cool air.

Your freezer relies on the flow of air from a ventilation system between your freezer and cooler compartments to keep temperatures stable. People often place food items in front of vents at the rear of their refrigerator, unaware that these vents are crucial for airflow through your entire refrigerator, thus keeping your appliance cool. When you are storing items in your cooler, put them far from your coolers vents, so the cold air can freely enter your cooler.

Even if everything else about your fridge is working properly, if a door seal–also called the door gasket–is not working properly, cold air inside your fridge can leak out. If the refrigerators lights are on, the interior fan (or blower) is running, and the air inside your fridge is at room temperature, a starter relay may be the problem. An evaporator fan motor failure is a common component fault that occurs when your Whirlpool fridge is not cooling, but the freezer is working correctly.

There might still be some cold due to the frost on the coils, but without any airflow on the coils. This frost must be removed with manual or auto defrost (in a refrigerator that is frost-free) to get the cooling to function correctly within the refrigerator. A closed-loop of refrigerant takes heat and moisture from an internal storage area, mostly the freezer, and passes through a set of coils, which pull off heat and dissipate it to the air.

To schedule refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Refrigerator Has Stopped Cooling My Food Sufficiently? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Oven Stops While Cooking?

Woman Trying To Use Her Oven

 

 

My Oven Stops While Cooking?

Your stoves sparker is not working is a problem that you can spot pretty easily without consulting a professional. An oven that is not warming up is often a result of either the igniter being bad (for gas stoves) or the heating elements being bad (for electric stoves). If your ranges burners are turning on, but your oven is not warming up, a clogged or malfunctioning igniter may be to blame.

If your gas stove is not heating up properly (or at all), first check the igniter. If the oven is not heating any more, check Thermostat and Selector Switch. If your oven is still not heating properly, you can check the gauges using an ohmmeter. When you flip on a switch, the thermostat decides if the oven needs to be heated or cooled.

If the cooling fan does not activate, the thermostat and the control panel tells the control panel to shut down the oven. If that happens, then the thermostat may continuously be asking for more heat, even if the oven is turned off. When the temperature gets low enough, a thermometer inside the oven would detect it and tell the control board to switch back the heating elements on so that they can get it back to a good temperature.

If you have checked to make sure that the heating element is working correctly, there is a chance your electronic controls controlling your ovens temperature are not reading a temperature drop as a problem. In all honesty, the faulty thermostat or heating elements in your oven are the most likely culprits for why your oven is unable to keep a consistent temperature.

If a sensor or thermostat is defective, the oven might simply fail to light up. If you have installed a new element, but the oven is not working anymore, it is possible that there is an electrical problem. If nothing changes after installing the new element, then a wiring problem could be why the oven does not work.

If the oven is turning off unexpectedly while trying to heat, a new circuit breaker may be needed. The built-in circuit breakers on some modern ovens will trip, which can occasionally cause your oven to shut down. Typically, when the switch is on, the only way to prevent your oven from warming up is to disconnect the power cord, or to shut off power at your electric box (breaker box). Most modern stoves that have a thermostat trip and shut down if the ventilation is inadequate.

A malfunctioning thermostat could be the reason why the oven turns off too early. Many electric furnaces actually have more than one thermostat, but if a primary thermostat or a sensor fails, then your furnace will simply continue heating until the safety thermostat kicks in. If your oven is not heating up correctly, but your range is working fine, this could be a sign you have a bad thermostat. If the stove is working just fine, but your oven is not heating up, it means the bake and broil elements are working, but you might have an inside fuse box that is blowing.

A thermal fuse that has been blown shuts down power to the oven, and it is what is making the oven malfunction. When the oven is not able to vent with enough air, it is going to get too hot, which causes these safety features to activate and turn the entire oven off. Typically, your oven will self-turn off because it has blocked the ventilation system, has an issue with its temperature probe, or has damaged the heating elements.

If an ovens sensor is not working, this can result in uneven cooking temperatures, that is, burned-out food. Reach can be caused by either the temperature sensor being defective, or by the temperature sensor touching the wall of the oven. If a sensor is accidentally knocked while cooking or cleaning, and is now touching the oven wall, this will result in an uneven cooking temp. When the temp sensor senses the temperature is too low, the thermostat turns on more baking elements until the oven is warm enough.

Always disconnect power and gas connections before moving your oven, or before removing any of its panels, in order to change the defective temp sensor. The only way to repair it is to replace the malfunctioning heating element, so make sure you call in a professional electrician who repairs electric ovens to have them look at it for you. As long as your oven is beyond its warranty, you should not let this repair scare you: You do not have to be an electrician to replace a heating element. Your element may have been damaged in many ways, but if your oven is simply not working, and your heating element is to blame, then the problem is probably due to leakage faults or a problem with your electrical wiring.

If you have had your oven for several years, it may be that components in the control board stopped working properly, which leads to a number of problems including the oven turning off on its own without any reason. Another common issue that could be causing your oven to simply stop is ventilation, some people wrongly assume that since an oven is powered by electricity rather than gas, that it does not need any ventilation. If both your gas oven and your gas burner stopped working, then it is most likely that your gas lines are faulty, which would require a professional to fix.

Your stoves gas line may be partially blocked with debris, causing the flow of gas into the gas oven to become interrupted. Keeping the vent free from debris can help prevent the furnace from turning off needlessly. Sometimes, your broiler or baking supply may be burning, affecting your electric ovens circuitry.

The best way to tell if that is an issue is with a multimeter, which we discuss below, but you can also open your oven and see if the oven lights flash.

If you are having oven issues and need oven repair in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com. Alternatively you can also visit our Google business website at https://cutt.ly/YEnc8qk.

 

The post My Oven Stops While Cooking? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

Why Does My Dishwasher Have No Power?

Young Male Technician Fixing Dishwasher With Digital Multimeter

 

 

Why Does My Dishwasher Have No Power?

If your dishwasher is still not getting power, then it may be that a fuse has gone bad, user interface controls are defective, electronic control boards are malfunctioning, or the wiring is damaged, which is stopping your dishwasher from getting power. Electrical complications may be to blame — the dishwasher just does not get power. A tripped circuit breaker is usually found as a reason for the dishwasher not getting power. Check the circuit breaker powering your dishwasher to make sure that it has not tripped.

No power When the dishwasher does not run, the front panel displays no lights, and pressing a button does not activate the dishwasher, you must check your circuit breaker or fuse.

If the dishwasher does not start, but has power, it may be stuck in the middle of the cycle. The first step to fix a dishwasher not starting is checking for the light switch. If your door is not closing properly enough for the door latch switch to trigger, then your dishwasher is not getting a trigger to begin, meaning that the light in the control panel of the dishwasher is not turning on. The door latch switches are what tells your dishwasher the door is sealed closed and that you are safe to begin the water job.

If your dishwashers door is not closing properly, you might have to remove the panel that surrounds it to inspect the parts. If the latch is broken, then the door cannot make a sound or keep the door closed anymore, meaning that the dishwasher cannot be started or operated safely. If the latch is jammed, then the latch switches cannot activate, and the dishwasher cannot start. If the selector switches or their connections to the control panel are damaged, it may be necessary to take off the doors and replace them.

If the control panel lights in your dishwasher are designed only to turn on when the door latches and release switches are working correctly, you will want to make sure that your assembly is aligned properly. If the controls panels lights are not working on yours, the first thing you should do is to make sure your dishwasher is connected correctly to a wall-mounted power supply. You may already have done that, but before starting checking for any more complex potential causes why the dishwasher is not starting, you should first check your power supply. If the dishwasher has an attached power cord, check that it is connected correctly.

If the dishwasher is plugged into an outlet correctly, it may have the potential to have the fuse blown within the plug. If it is plugged properly, you should verify the outlet is working by plugging in another appliance.

If your power cord is connected to a GFI/GFCI outlet with reset buttons, push reset on the outlet to reset the power. You will also want to press the reset button (to restore power) if you plugged the GE dishwasher into a GFI/GFCI outlet. If there is power (and an electric breaker is plugged in), test for controlling voltage.

Look inside the housebreaker box to see whether any circuit breakers have been tripped (make sure that the breakers controlling your GE dishwashers power circuit are NOT off) or to reset a fuse. If the wall switch controls the GE dishwasher, check that power is turned on. Because you cannot usually tell whether the tripped circuit breaker has been tripped, reset your dishwashers breaker, turning it off and turning it back on. Remember to disconnect your dishwasher, or disconnect it, from the inside of the electric panel, before checking the electrical components.

The dishwasher might be powered on, and timer controls might work just fine. If you notice the buttons are glowing or blinking, disconnecting the machine for a minute or two, and then reconnecting may help reset the dishwasher.

If you have pushed the Start button more than once, your dishwasher might return to a Drain cycle. When a dishwasher is stopped midway through the washing cycle, and is not properly reset or restarted, it can become stuck in this cycle, and be unable to begin the next one. Common difficulties homeowners encounter with dishwashers are problems with the machine getting no water, not draining correctly, or simply not starting.

Motor hum If your dishwasher has power and lights, but the motor is buzzing and does not begin the wash cycle, this may be an indication of mechanical or electrical problems within the unit. A button getting stuck also can make the dishwasher become unresponsive, and can result in the control panel having an intermittent light.

The door switch allows the power to be sent to your dishwasher only when you have closed the dishwasher door correctly. To test whether your door switch is defective, remove the door switch from your dishwasher and check continuity with a multimeter. You will then have to pull it out of your Fridaire dishwasher so that you can check. Testing and Replacing the Start Switch Your starter switch will require that you remove the doors.

Check that Control Lock is on, where it is. The Child Lockout function keeps your GE dishwasher from being turned on by accident. Check your cables (the power cord may be tangled up in the wall, if you have one) and do not forget to test whether your wall socket is working itself.

If you can’t find the cause of the dishwasher problems then call for dishwasher repair in Oklahoma City and be sure and contact Appliance Repair OKC Services by calling 405-378-4566 or visit our local website at https://www.okcappliance.com or also our Google business website at https://cli.re/Dyq1ME. Call now!

 

The post Why Does My Dishwasher Have No Power? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

There Is Water In The Ice Maker Mold, But It Isn’t Freezing?

 

 

There Is Water In The Ice Maker Mold, But It Isn’t Freezing?

The flow of water into the Samsung Ice Maker may also become restricted if you install a water filter incorrectly, or replace the water filter with an aftermarket filter. If you notice that your water flow is reduced, or there is not any water at all, your ice makers water supply lines leading into your refrigerator might be clogged, or it could have frozen over entirely. The water lines are unable to provide a correct water flow to the ice maker if they are blocked with mineral deposits or are too small.

If your water lines are plugged, the water cannot get out, and your ice does not get made. Water cannot get to your built-in ice maker because of frozen lines, missing filters, or closed delivery valves. If your ice maker is not producing ice, or the ice is small or misshaped, a plugged water supply tube may be causing a problem. If your ice makers fill tubes are clogged with ice, it could be because you need more water pressure from the home to ensure that water flows to the ice maker, or there may be mud or defects in the water intake valves.

The fill pipe, which delivers water to your fridges ice maker, could freeze up and prevent any water from reaching the ice maker. If water is not going to your fridges ice maker, there are several things that you can check to try and fix the problem. If your fridges ice maker is still not producing ice, you are going to want service. If you have tried these tips to fix ice makers, but the ice maker is still not working, plug your cooler back in and use Appliance Repair OKC Services flexible repair schedule to get your fridge repaired.

Whether you have a side-by-side, an armoire-style, or standard top-freezer model, these ice maker problem-solving tips can help you avoid this repair. These solutions work if your Samsung ice maker is freezing in your French-door, side-by-side, top-freezer, or bottom-freezer fridge. Some ice maker issues may eventually cause larger (and costlier) problems with your fridge or freezer, so it is important that you find a fix ASAP so you can get things working correctly.

Assuming that your filters are clean, your water lines are working, and everything else is properly installed, then the issue may just be the motor of the ice maker is not working anymore. If the ice maker is still not making ice, even after the control arm on the ice maker has been pulled down, it is possible that there is either a mechanical or an electrical issue. If a control arm is moved, gets stuck in something, or falls down, your machine could create ice out of control at all.

If your refrigerator has an ice ejector that is not ejecting, this may be one of a few things. Ice chips can clog an evaporator — a vent at the back of the fridge and result in ice all over your refrigerator walls and ceiling. If your thermostat is set to very low, your whole ice machine can suffer, forcing water to freeze before it gets to ice-making mold.

The cooling device then freezes water, and the ice makers thermostat senses when it has reached a certain temperature and stops the freezing process. If your tub is frozen, you can remove the ice maker completely from your cooler and let it thaw, or you can thaw it with hot water (in a turkey baster or spritz bottle) without having to remove it. If the whole ice block is stuck, there is no way new ice will be formed, and letting the water line go may also create problems, as it cannot be filled with water.

If a whole batch of ice gets stuck in the ice makers bin, this stops new batches of ice being formed & the waterline might also become stuck, not allowing the tray to be filled completely. A bend in the waterline, for instance, can result in a stoppage of water, preventing the tray from being filled completely. If your water filter is clogged, you might see water lines stoppages as well as an interruption of ice production.

To test your water intake valve, first turn off your water and disconnect the refrigerator
this should take just a brief moment, so you won’t need to worry about items inside your fridge being affected if you leave the door closed. While cleaning the ice maker is generally also a good time to clean and defrost the freezer completely, if you don’t want to shut off the whole fridge, you can also shut off the water inlet valve for the refrigerator, unplug the tubing, and dump water out of your refrigerator. You can use a hairdryer to defrost the hose, or you can leave the fridge untouched for up to two hours.

Remove any remaining ice in the mold by hand, adding some water and leaving for one minute. The hot water will melt the bits of stuck ice without adding any chemicals to the ice maker bowl — making it safer for you to start making ice again right in the build of your maker. If you do find any ice in your ice mold, that means that your ice maker is getting water, and it is probably not a problem with your water supply.

Ice makers get their water through a small water line running from the fridge into the water tubing, hose, or filtration unit. Some higher-end fridge models also include a dripping water system to provide chilled, filtered water as well as ice.

Your water quality (such as hard, unsoftened water) can contribute to the scaly buildup, which may impact your ice makers performance. Because of the inlet valve malfunction, water can fill up your ice molds too much and leak everywhere around your Samsung ice maker.

To schedule ice maker repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post There Is Water In The Ice Maker Mold, But It Isn’t Freezing? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Freezer Was Working But Now Won’t Power Up?

repair tech repairing freezer with customer

 

 

My Freezer Was Working But Now Won’t Power Up?

If your freezer stops working, or is not freezing, it could have an issue with your thermostat, which controls the temperature. If your freezer is not working or is not freezing, there may be an issue with the control board. If your freezer is not freezing your food, this could mean that the compressor startup relay is bad.

A freezer cannot chill unless the compressor is working correctly. The compressor produces, and then circulates, refrigerant through your freezer, so if your compressor has gone bad, the freezer is not going to get cold.

The compressor essentially acts as the pump for the refrigerant within. The compressor compresses refrigerant, or cooling fluid, and pumps it around through evaporator coils and condenser coils. The evaporator takes the heat out of the cooler, cooling the contents, and turning cool refrigerant into hot steam. The fan of the evaporator, which circulates the cool air through the refrigerator, starts heating up throughout the freezer as soon as it stops working.

Once in diagnostic mode, you will have to place your fridge into the evaporator fan testing (which, again, should be in the manual). If you are used to working with this, shut off your appliance and open up the refrigerator to remove the plate that is located in the control panel.

Pull the fridge out of the wall slowly, and then turn the electricity off. Check the socket where your refrigerator is connected to (which is likely behind your fridge) to see if that is the breakers, or you reset a tripped breaker and still have no power. To check a power cord is not working, turn the fridge off and unplug it.

This may seem like a bit of an overly basic response, but a power cord that has worked loose from an outlet, or an amp flipped, can turn your whole refrigerator off. Odds are, a few components of your refrigerator are drawing too much power, causing a circuit breaker to trip to prevent overloading.

Some problems may not knock out power to the entire Frigidaire fridge, but may result in one specific part of your refrigerator, such as the compressor startup relay or the thermostat, stopping working.

You will need to open the refrigerator to access that part, but once you do, you may need to change out the compressor start relay, but just remove the old one and insert a new one. This part is also known as a controller, and it works by feeding the power to the compressors startup coils so that your fridge starts. The starter relay is a crucial component inside of your freezer, because the starter relay helps to keep your compressor running. To check for a problem starting relay, your repair professional will disconnect your freezer from the electrical grid and pull out the starter relay from your compressor.

If he or she has installed a new starter relay assembly, power back the freezer and test whether it is freezing now. Once the condenser coil is cleaned and/or defrosted, turn your freezer back on and check if it now properly freezes.

Plug in the fridge and ensure that the condenser fan is running while the compressor is running. If the fan is running but the compressor does not turn on, or you hear clicking sounds coming from the unit, check your overheating relays for signs of overheating or arcing.

If the fridge does not start, and there is no fan running, you might have a faulty control. If you can hear the compressor motor running, but your refrigerator is not cooling at all, then there could be an issue with your evaporator or condenser coils. If you hear the compressor running, but your refrigerator is not cooling, then it is more likely that there is either a frost-clogged evaporator coil, or the evaporator fan is jammed or broken.

If you set the fridges thermostat for colder air, the fridges compressor will start up, forcing less air to flow through the cooling fan. The cold air cycles back and forth through air vents. Every second that the doors are opened increases temperatures inside the refrigerator and freezer.

When the thermostat perceives the temperature within the refrigerator is getting slightly too hot, it sends a signal to the compressor telling it to turn on. When you turn the unit on, the thermostat sends a signal to the starter capacitor, which activates the compressor and starts the cooling cycle.

Normally, when your thermostat calls for additional cooling, your fridges condenser fan and compressor, located near the floor in the back of most fridges, turn on. The purpose of a temperature-controlled thermostat is to monitor your freezers temperature, then tell the control board how much electrical power to send to the fan and the condenser compressor to allow the freezer to chill.

Test the compressor by disconnecting the refrigerator for approximately 2 hours, and reconnecting it. You connect an electronics device into one of the compressors, the power flows from an outlet to the device, and the device works.

A faulty thermostat does not send power to the refrigeration system, and the refrigerator does not get cold. The sealed system might leak, with insufficient refrigerant available to cool the appliance to its desired temperature. If the refrigerator is working, a problem could be with the defrost timer, defrost heater, or defrost thermostat.

To schedule refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Freezer Was Working But Now Won’t Power Up? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

My Refrigerator Isn’t Cooling And Food Is Spoiling?

repairman repairing fridge with customer

 

 

My Refrigerator Isn’t Cooling And Food Is Spoiling?

Your refrigerator may be losing cooling capacity as well, as it is literally losing the coolant liquid from which the cold is generated. When your refrigerator is not cool enough, you have to worry about not only food spoiling, you are also losing power since your refrigerator has to constantly run at an excessive temperature.

When your fridge is not cool enough anymore, however, foods are left vulnerable to spoilage, which puts your family’s health at risk. A hot fridge causes wasted food, is torn too early, and generally decreases your homes health and sustainability. When your refrigerator is out of commission, this leads to spoiled food and other problems. If your refrigerator is too hot, it is not only your food that is going to spoil.

A badly frozen freezer may take a full day to defrost, so make plans to keep perishables in your neighbors refrigerator, if you can. You can expect to defrost the freezer from time to time, but if this happens too frequently, that is not a good sign. If ice jams do occur, you may want to remove the items from the refrigerator and freezer, disconnect the units for an overnight period, then reconnect them.

First, your freezer is chilled, and then a bit of cool air is forced in from the vents between your freezer and refrigerator sections. Then, room-temperature air is forced through the condenser coils, creating the cold air, which is then cycled between the freezer and the refrigerator. The coils are the most difficult working parts on the fridge, part of the process of taking hot gases and turning them into a cold liquid, which makes the refrigerator cold.

As condenser coils become dirtier, the fridge becomes less effective, making it more difficult for the fridge to keep cold. If everything else seems to work but your refrigerator is not cooling, then you have got a condenser coil issue. If the coils are dirty enough, then the refrigerator is never going to get cool enough, nor can it get the interior of the refrigerator down to a suitable temperature. The condenser is similar to the radiator, and needs to remain clean in order to move heat away from the interior of the fridge.

Just like the gasket, the walls of your cooler helps to retain cold air within your cooler. The door gasket helps keep the cool air within the fridge, preventing it from leaking.

Even if everything else about your fridge is working properly, the cold air from inside the fridge can be lost if the door seals – aka the door gaskets – are not working properly. Your fridge might be cooling efficiently, but it is losing its cool because of the unsealed doors. Make sure that nothing is blocking any circulation vents, and air is free to circulate inside the refrigerator.

Locate vents both in the freezer section, as well as in the cooler, and remove anything that may be blocking them. If your fridge model has vents from freezer to fridge, you may want to clean those out so cold air can get through. Clear freezer-fridge vents to let colder air into the freezer part.
With your refrigerator unplugged, find the condenser fan motor, typically located at the lower rear of your refrigerator, and remove the access panel. Unplug your refrigerator, and then find the evaporator fanayou can typically find this behind the refrigerator wall. Pull back your refrigerator slightly, making sure that itas still connected to the wall.

Look to see if any items or boxes are blocking vents, which can keep the cold air from moving through the fridge. If that vent is covered by withering ice, or stored food on one side, it can severely hamper the fridges ability to circulate cool air and maintain its cooling at the cooler end. Putting too much food inside your refrigerator could clog up a vent and prevent cool air from being able to circulate the way it is supposed to. If this vent is blocked, either on one side or another, then your refrigerator is not getting cool enough, and your freezer may freeze over time.

Unfortunately, you are having trouble with this refrigerators fan, as the condenser fan motor has stopped working, and all you are getting is the fridge continuing to get cool, but no cooler.

In order for your whole fridge to maintain its optimal cool temperature, airflow is needed in the fridge compartment. Most refrigerators generate all of their cold air for the freezer, so the fridge compartment is kept cool by the airflow in the gap between the fridge and freezer areas.

If you installed your home fridge in the garage, the refrigerator might not cool as well, since the garage does not have the controlled whether that a home does. The reason your refrigerator has sat idle is likely because it does not get the right circulation.

It is not good to overload your refrigerator with bears because the air circulation may become limited. A good rule of thumb is to store lots of food items in the fridge, which helps keep the temperature down, but not pack them in such a way that the air cannot circulate easily from shelf to shelf. When that door is malfunctioning, it may prevent the cold air from flowing in the refrigerator as much as it needs to in order to keep it at a good temperature.

It is only after this door switches on and is depressed, when most refrigerators revert back to cooling. The fan in the evaporator, which circulates cool air through the fridge, will begin to heat up throughout the fridge as soon as it stops working. The thermostat controlling temperature allows electricity to be passed through the compressor, the evaporator fan, and the condenser fan. This may seem obvious, but an accidental bump in or upsetting of the thermostat could decrease a fridges ability to generate cold air.

To schedule refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!

 

The post My Refrigerator Isn’t Cooling And Food Is Spoiling? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.

Why Is My Oven Not Getting Up To Heat?

appliance repair technician repairing oven

 

 

Why Is My Oven Not Getting Up To Heat?

If your oven is not getting enough heat, there could be an adjustment problem, or your thermostat might not be working. If your oven is not getting hot enough, it could be the fact that the oven door itself is not closing all the way, or is not sitting flush in its enclosure. Temperature sensors and thermostats might not be to blame if your oven does not start heating at all. In Supposedly, the malfunctioning temperature sensor could erroneously turn off your oven while warming.

Sometimes, your gas stove may heat up, but you may see a different temperature on your display. If the thermostat in the oven is not malfunctioning, your furnace might need calibration.

If you notice your electric oven is not heating to the right temperature, and your food comes out undercooked, it could be caused by the electrical ovens defective thermostat. If your oven is not warming up quickly enough, it never seems to reach the right temperature, or food is burning at the top and under-cooking at the bottom, your baking elements heating elements could be to blame. A defective heating element, otherwise known as the baking element or the baking coil is a common cause of an electric oven or range that is not heating properly. A malfunctioning element may keep your oven from warming while the range top furnace is working properly.

Even if the heating elements on your electric range are working properly, the ones on the oven might not be because of tripping issues or other damage that might have occurred to some of their critical components. Once you have eliminated your burners and the electrical connections, it is possible your oven is not heating up due to an issue with your gas connections. For a more serious problem of the gas oven not heating up at all, you may have a damaged burner or oven ignition electrode. Your gas oven might not heat up at all if your ovens ignition is not working, or it is completely off.

If your gas oven is not getting hot, it could have an improperly functioning burner in your furnace, or the supply of gas pipes, at fault. If your stove burner is turning on, but your oven is not heating, a clogged or malfunctioning burner could be to blame. Fortunately, there are possible solutions for all of these problems caused by an oven that is not heating. One of the most common problems is that the oven is not heating to the correct temperature.

If you open up a gas oven, but it is not heating, there are several possible causes you may want to address. If you are lucky, the issue might just be that an electrical circuit supplying the electricity to the gas oven has tripped the circuit breaker.

Because of this, even if your furnace is working, and you have a proper supply of gas to your burner, specialized burners and relief valves, safety valves, and other critical parts of the furnace can malfunction and stop the appliance from heating. The igniters, or sparks, would fire up in order to keep the safety valves open until the gas stove has reached its assigned temperature. If the igniter seems fine, you can switch back the electricity, set the gas oven on the heating setting, and watch for the igniter early in the heating cycle.

After this, you can adjust your ovens temperature dial appropriately. Simply put the oven thermometer inside of the oven, and see if the temperature setting is consistent with the temperature readout on the thermometer.

If it is not heating up properly yet, you can use an ohmmeter to check that the sensor is working. When the temperature gets low enough, your ovens thermometer senses this and signals your control board to fire the heating elements again to get the temperature up again. The next element that is targeted when your oven is not getting hot is your thermostat. When temperatures drop enough, the temperature sensor signals your ovens control panel to warm the baking elements up and raise the temperature.

The sensor regulates temperature within the chamber of your oven, and if it is damaged or defective in any way, it will refuse to let the electric oven power on, even though it has electricity. If your temperature sensor has drifted around and is touching the edges of its openings, or the sides of your oven, that is bad news, it is getting an inaccurate reading.

A sensor touching the ovens side is more likely if you are seeing low temperatures, as the sensor is picking up a lot more heat than simply the air temperature within the oven. A broken thermostat might not raise your temperature as intended; so, the dial indicates a lower temperature you have set, but in reality, your oven is running at a lower temperature.

When a baking element is broken, it may fail to function as intended when you open the oven and this includes failing to heat up to the correct oven temperature. In all honesty, the thermostat or faulty heating elements in the oven are most likely to be to blame when the oven is not maintaining the right temperature. If your oven door cannot shut, heat is constantly being lost, and the amount of heat output from the furnace that is programmed into it is not sufficient enough to cook the food fully to the specified temperature.

Due to aging, continuous use, and poor handling, ovens may begin to exhibit specific flaws, one of which is the insufficient heating of the oven. If the broiler and the burners are working, but your oven is not heating, then it is possible that you have a malfunctioning burner, and this is the most common cause for an oven malfunction. The more complex, and more elusive, potential issue is a broken, or in some way defective, inner oven wire.

Before replacing a worn-out stovetop sparker, make sure that a poor gas flow is not to blame. If gas flow checks good, move to the ovens own gas ignition.

If you are having oven issues and need oven repair in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com. Alternatively you can also visit our Google business website at https://cutt.ly/YEnc8qk.

 

The post Why Is My Oven Not Getting Up To Heat? appeared first on Appliance Repair OKC Services | Best Appliance, Washing Machine Repair Company in Oklahoma.